Description: 40/50/100Pcs Tile Leveling System Floor Kit Alignment Clip Reusable Spacers Locator W/ Wrench.
Specification: Material: fine PP + Stainless Steel.
Color: Black+Orange.
Applicable Brick Difference: >1.5mm.
Applicable Tile Thickness: 5-16mm.
Features: 1. Wear-resistant, recyclable, reusable.
2. Easy to use in DIY operation.
3. Balance tiles in the same horizontal position.
4. Improve tile installation speed.
5. Reduce installer fatigue / pressure.
6. There is virtually no crackless, flat surface.
7. This reduces the need for sharpening and polishing.
8. Avoid shingles from movement during solidification.
Usage Tips: Lay the first tile, leaving more than 2mm. Close to tile.
Insert T-pins next to the gap between the tiles. Then rotate 90 degrees and the T-needle is attached to the bottom of the two tiles. Adjust the cover by hand / wrench until the two tiles are on the same level.
After leveling for about 5-6 hours, before the cement / adhesive is completely dry, rotate the lid in reverse and take off the 180 degree T needle.
Avoid not removing the T-leveling tile system: 1. Ceramic tile joints are 2mm or more (cross joints are recommended).
2. When leveling, adhesive cement or tile cement around T-type leveler should be cleaned.
3. Remove the T-type straightener about 5-6 hours after leveling before the tile or cement binder is completely dried.
Package Included: 40/50/100 x Tile Leveling System Floor Kit (Optional).
1/2 x Wrench
Product Attributes:
