Specifications:
Recommended input power: 600W.
Recommend the use of PV modules: 2 x 300W, 30-50VOC.
Maximum input DC voltage: 54V.
Peak power tracking voltage: 25-40V.
Operating voltage range: 17-50V.
Min/Max start voltage: 22-50V.
Maximum DC short current: 40A.
Maximum input current: 27.2A.
Output power: 220VAC
Peak power output: 600W. .
Rated output power: 550W.
Rated output current: 2.39A.
Rated voltage range: 180-260VAC.
Rated frequency range: 47-52.5 Hz.
Power factor: >99%.
Maximum units per branch circuit: 12pcs (Single-phase).
Static MPPT efficiency: 99.5%.
Maximum output efficiency: 92.5%.
Nighttime power consumption: <1W.
THD: <5%.
Ambient temperature: -40~+60 .
Operating temperature range(inverter inside) : -40~+82 .
Waterproof rating: IP65.
Cooling: Self-cooling.
Features:
MPPT TECHNOLOGY - Precise maximum power point tracking. MPPT algorithm can optimize the power collection from solar panels. It accurately captures and collects sunlight, and locks in the maximum output power points, significantly increasing over 25% of the power generation. With the monitoring system, it can help you monitor the power generation efficiency of the power station and reduce workforce expenses.
HIGH PERFORMANCE - Reverse power transmission. With efficient reverse power transmission technology, the power transmission rate up to 99.9%. Full digital control can be achieved by using intelligent soft switching technology and built-in MCU for charging modules; Introducing high-frequency switching power supply and SPWM control technology. It features strong anti-interference ability, fast calculation speed, a high degree of intelligence, high control precision, and excellent output waveform.
PROTECTIVE and RELIABLE - IP65 waterproof design and aluminum alloy material can effectively prevent rainwater erosion on the surface. It provides electrical isolation, more reliable to use. It offers multiple protection functions, such as over-current protection, short circuit protection, low-voltage protection, over high voltage protection.
EASY OPERATION - Lightweight and easy to install, many inverters can be stacked arbitrarily to form a single-phase parallel stacking system. Almost no maintenance work is required, clean the dust on the photovoltaic panel occasionally.
SUSTAINABLE USE - This solar power grid-tie micro-inverter can convert DC power generated by solar panels into AC power. Our solar inverter provides sustainable energy and brings excellent environmental benefits.
Friendly Note:
This is a Grid-Tie inverter, which means connecting the Grid power to the "AC output" would be necessary for Grid-tie power generation. Please check the voltage is 110V or 220V as well, different options according to the Grid voltage.
If taking the solar panels as the input instead of batteries, "VOC" Voltage should be set in the range of 30-48V, the solar panels power is set 20% bigger than the inverters output power would be recommended. E.g. for the 600W inverter, the total solar panels total output power should be 700-750W. For the 1200W inverter, the total power should be 1200~1400W.
If taking the battery packs as input, 36V battery packs would be firstly recommended, three 12V batteries are connecting in series to 36V would be fine. When wires the inverter, please follow the indication in the inverter, Pos (+) to Pos (+), Neg(-) to Neg (-). Regarding the batterys capacity, 36V/10mah to 300W, 36V/20mah to the 600W inverter, and 36V/40-45mah to the 1200W inverter.
Please check the configuration, input and output voltage are totally in the allowance, ensure the inverter could run normally and Grid to Grid generation.
Package Content:
1 x 600W Solar Grid Tie Micro Inverter.
1 x Tee connector.
1 x 1.5 m Power Cable.
1 x Set of Mounting Accessories.
1 x Product Manual
Product Attributes:
Weight (lbs.): 6.39 lb
